Fiberglass Powder/Emulsion Chopped Strand Mat
E-Glass Powder/Emulsion Chopped Strand Mat is made of randomly distributed chopped strands held together by a Powder/Emulsion binder. It is compatible with UP, VE, EP, PF resins. The roll width ranges from 50mm to 3120mm. Additional demands on wet-out and decomposition time may be available upon request.
Powder/Emulsion Chopped Strand Mat is made of randomly distributed chopped glass strands held together by an powder binder. P04 is compatible with unsaturated polyester, vinyl ester, epoxy and phenolic resins. It is designed for use in hand lay-up, filament winding, compression molding and continuous laminating processes.
Chopped strands mat Features
Compatible with multiple resin systems
Chemical corrosion resistant pipes
Chopped strand mat Technical Parameters
Chopped strand mat Packaging
Each Powder Chopped Strand Mat is wound onto a cardboard tube which has an inside diameter of 90mm. The outside diameter of the roll is approximately 340mm. Each roll is wrapped in plastic film and then packed in a cardboard box. The rolls are stacked horizontally or vertically onto pallets. All pallets are then stretch wrapped and strapped to maintain stability during transportation.
Chopped strand mat Storage
Unless otherwise specified, fiberglass products should be stored in a dry, cool and moistureproof area. Room temperature and humidity should always be maintained at 15°C – 35°C, 35% – 65% respectively.
Best used within 12 months after production date. Fiberglass products should remain in their original packaging until just prior to use.